Deburring process
The operator puts the cylinder on the feeding conveyor line;
The feeding conveyor line automatically runs the cylinder into the deburring auxiliary machine to deburr the suction holes, spring holes and groove bottom holes;
The loading conveyor line automatically runs the cylinder to the loading and unloading manipulator, and the loading and unloading manipulator grabs the cylinder and puts it into the deburring host;
The deburring host is divided into 8 stations to automatically deburr the cylinder plane, inner hole, sliding groove and other parts;
1# station: loading and unloading station;
2#Working station: Motor frequency conversion variable speed drive nylon brush forward and reverse to brush the inner hole;
3# Station: Motor frequency conversion variable speed drive nylon brush forward and reverse brush smooth slot 1;
4#Station: Motor frequency conversion variable speed drive nylon brush forward and reverse brushing plane 1;
5#Working station: The turning manipulator grips the bearing seat and turns 180 degrees;
6#Station: Motor frequency conversion variable speed drive nylon brush forward and reverse brush smooth slot 2;
7#Station: Motor frequency conversion variable speed drive nylon brush forward and reverse brushing plane 2;
8# station: cleaning and drying the cylinder;
After the cylinder deburring processing is completed, the loading and unloading manipulator grabs the cylinder to the unloading conveyor line;
The operator removes the cylinder from the unloading conveyor line.
优势
Wet deburring is used, and the workpiece is cooled and cleaned by water-soluble cutting fluid;
Adopt the clamping method of clamping the inner hole of the cylinder;
With the function of counting Nissan parts;
With automatic compensation for brush wear;
It has a fault alarm reminder function to help the operator troubleshoot.
技术参数表
SPECIFICATIONS |
|
Power |
AC380V 50Hz |
Air compression |
0.4-0.6Mpa |
Pace |
≤15s |
Brush |
Nylon/Wire Brush |
Brush Rotating Speed |
0-1720rpm |
Cutter |
8工位 |
Dimension |
4500*4550*2500mm |
Weight |
7.5t |
Picture
Workpieces
- Workpieces
Contact
HESH Industry Technology Co.,Ltd.
address:No. 13 Youth Road, Hongqi Town, Jinwan District, Zhuhai City, Guangdong ProvinceTel: |
(+86)756-6348028 (+86)13431909300(Mr.Zhang) (+86)13702330296(Mr.Wu) |
Fax: | (+86)756-6324320 |
E-Mail: | hesh@zh-heshi.com |